KSh842,097.00

Description

Our Double Auger Chain Feed Mixers Are In The Form Of Semi-Hydraulic, They Take Oil From Tractor. They Can Be Manufactured As Full Hydraulic On Request. Our machine is also Available Only As Electrical. Machines Have A Single-Sided Unloading Band On The Right Side, Optionally Discharge Gate Can Be Built On The Right Side Or Both Sides. Scale can be fitted to our Machines On Request. Electrical Unit Can Be Built On Request. Our Chain Feed Mixing Trailers Are In Sizes Of 3m³, 4m³.
Purpose Of The Machine: The Purpose Is To Make A Homogeneous Mixture Of Different Feed Materials And Distribute This Mixture Equally To Animals. Digestion Of The Mixed Feed Is Easy And Nutritious. A visible increase In The Meat And Milk Yield Of The Animals Is Ensured. The Feed Prepared At The Trailer Is More Homogeneous Than The Feed mixed by hand. It provides The Animal To Eat The Feed More Appetite. Meat And Milk Yields Will Also Be Equal To Each Other As The Animals Consuming The Feed Prepared In The Feed Mixing Trailers Will Consume The Feed At The Same Ratio With The Same Homogeneity. The Machine Minces The Fibrous Feeds Via its Chopping Blades. It Provides Homogeneity by mixing the Fibrous Feed stuffs That Are Minced By The Mixer Helices On Its Top With Other Feed stuffs. By This Means,The Evacuation Of The Fibrous Feed stuff Without Being Digested Is Prevented And Utmost Benefit Is Provided From The Feed stuff. Optional Equipment Such As Loading Milling Machine, Hydraulic Back Cover, Double-Sided Drainage Band Can Be Attached To The Trailer In Order To Facilitate The Loading And Unloading The Feed stuffs On The Trailer. Optionally A Digital Weighing Machine, A Park Separating Jack can also be added. The Trailer  Is Connected To The Tractor By A Hitching System. The Trailer Takes its Movement From The Tail Axle Of The Tractor. The Hydraulic Systems On It Can Be Used Easily Via The Ergonomic Control Levers Till The User. Optionally, It Is Also Available As An Electric-Motor Fixed Type.

TECHNICAL CHARACTERISTICS:

Width

2005 mm

Lenght

4000 mm

Height

2100 mm

Stock Volume

4 m³

Empty Weight

1712 kg

Back Cover Type

Hydraulic Bucket

Auger System

Double Helix On The Base

Drive System

Chain Gear Group

Power Take-Off Cycle

540 d/ min.

Hydraulic Pressure Source

Tractor Oil Pump

Mixture Homogeneity

% 95 / 15 minute

Oil Pump Power Source

Tractor

Required Power(Min.)

40 bg

Number of Motion Input Shaft

One

Wheel

10.0 / 80 – 12

Tractor Separator Foot

Manual Jack

Draining Cap

Right-Sided Unloading Hydraulic

Band Height Setting

Manual

Tank Body Sheet Thickness- Floor Sheet Thickness

8 mm

No. Of Chopping Blades On The Auger

50 Pieces

Reviews

There are no reviews yet.

Be the first to review “Horizontal Auger Feed Mixers With A Chained System 4m3 ( Numaan / Vasel )”

Your email address will not be published. Required fields are marked *