Description
Our Double Auger Reducer Feed Mixers Are Manufactured In Full Hydraulic Form. It Has Oil Tank. Machines Have A Single-Sided Unloading Band On The Right Side, Optionally Discharge Gate Can Be Built On The Right Side Or Both Sides. Scale Can Be Fitted To Our Machines On Request. Electrical Unit Can Be Built On Request. Our Reducer Feed Mixing Trailers Are In Sizes Of 5m³, 6m³, 8m³, 10m³, 12m³. Larger Machines Can Be Manufactured On Request.
Purpose Of The Machine: The Purpose Is To Make A Homogeneous Mixture Of Different Feed Materials And Distribute This Mixture Equally To Animals. Digestion Of The Mixed Feed is easy and nutritious. A Visible Increase In The Meat And Milk Yield Of The Animals Is Ensured. The Feed Prepared At The Trailer Is More Homogeneous Than The Feed Mixed By Hand. It Provides The Animal To Eat The Feed More Appetite. Meat And Milk Yields Will Also Be Equal To Each Other As The Animals Consuming The Feed Prepared In The feed Mixing Trailers Will Consume The Feed At The Same Ratio With The Same Homogeneity. The Machine Minces The Fibrous Feeds Via Its Chopping Blades. It Provides Homogeneity by mixing the Fibrous Feed stuffs That Are Minced By The Mixer Helices On Its Top With Other feed stuffs. By This Means, The Evacuation Of The Fibrous feed stuff Without Being Digested Is Prevented And Utmost Benefit Is Provided From The feed stuff. Optional Equipment Such As Loading Milling Machine, Hydraulic Back Cover, Double-Sided Drainage Band Can Be Attached To The Trailer In Order To Facilitate The Loading And Unloading The Feed stuffs On The Trailer. Optionally A Digital Weighing Machine, A Park Separating Jack Can Also Be Added. The Trailer Is Connected To The Tractor By A Hitching System. The Trailer Takes Its Movement From The Tail Axle Of The Tractor. The Hydraulic Systems On It Can Be Used Easily Via The Ergonomic Control Levers Till The User. Optionally, It Is Also Available As An Electric-Motor Fixed Type.
TECHNICAL CHARACTERISTICS:
Width |
1780 mm |
Lenght |
4450 mm |
Height |
2350 mm |
Stock Volume |
5 m³ |
Empty Weight |
2350 Kg |
Back Cover Type |
Hydraulic Bucket |
Auger System |
Double Helix on The Base |
Power Take-Off Cycle |
540 d/ min. |
Weighbridge System |
Digital Balance |
Hydraulic Pressure Source |
Tractor Oil Pump |
Mixture Homogeneity |
% 95 / 15 minute |
Oil Pump Power Source |
Tractor |
Required Power(Min.) |
40 bg |
Number of Motion Input Shaft |
One |
Wheel |
9.00-16 |
Tractor Separator Foot |
Hydraulic Jack |
Draining Cap |
Right-Sided Unloading Hydraulic |
Tank Body Sheet Thickness- Floor Sheet Thickness |
10 mm |
No. Of chopping Blades On The Auger |
70 pieces |
Fob Usd$10000
Reviews
There are no reviews yet.