Description
Our Double Auger Reducer Feed Mixers Are Manufactured In Full Hydraulic Form. It Has Oil Tank. Machines Have A Single-Sided Unloading Band On The Right Side, Optionally Discharge Gate Can Be Built On The Right Side Or Both Sides. Scale Can Be Fitted To Our Machines On Request. Electrical Unit Can Be Built On Request. Our Reducer Feed Mixing Trailers Are In Sizes Of 5m³, 6m³, 8m³, 10m³, 12m³. Larger Machines Can Be Manufactured On Request.
Purpose Of The Machine: The Purpose Is To Make A Homogeneous Mixture Of Different Feed Materials And Distribute This Mixture Equally To Animals. Digestion Of The Mixed Feed is easy and nutritious. A Visible Increase In The Meat And Milk Yield Of The Animals Is Ensured. The Feed Prepared At The Trailer Is More Homogeneous Than The Feed Mixed By Hand. It Provides The Animal To Eat The Feed More Appetite. Meat And Milk Yields Will Also Be Equal To Each Other As The Animals Consuming The Feed Prepared In The feed Mixing Trailers Will Consume The Feed At The Same Ratio With The Same Homogeneity. The Machine Minces The Fibrous Feeds Via Its Chopping Blades. It Provides Homogeneity By Mixing the Fibrous Feed stuffs That Are Minced By The Mixer Helices On Its Top With Other feed stuffs. By This Means, The Evacuation Of The Fibrous feed stuff Without Being Digested Is Prevented And Utmost Benefit Is Provided From The feed stuff. Optional Equipment Such As Loading Milling Machine, Hydraulic Back Cover, Double-Sided Drainage Band Can Be Attached To The Trailer In Order To Facilitate The Loading And Unloading The Feed stuffs On The Trailer. Optionally A Digital Weighing Machine, A Park Separating Jack Can Also Be Added. The Trailer Is Connected To The Tractor By A Hitching System. The Trailer Takes Its Movement From The Tail Axle Of The Tractor. The Hydraulic Systems On It Can Be Used Easily Via The Ergonomic Control Levers Till The User. Optionally, It Is Also Available As An Electric-Motor Fixed Type.
TECHNICAL CHARACTERISTICS:
Width
2500 mm
Lenght
7500 mm
Height
2700 mm
Stock Volume
16 m³
Empty Weight
Kg
Back Cover Type
Hydraulic Bucket
Auger System
Double Helix on The Base
Drive System
Planetary Gearbox
Power Take-Off Cycle
540 d/ min.
Weighbridge System
Digital Balance
Hydraulic Pressure Source
Hydraulic Pump on Machine
Mixture Homogeneity
% 95 / 15 minute
Required Power(Min.)
75 Kw / 100 bg
Number of Motion Input Shaft
2 Units
Oil Pump Power Source
Electricity Engine / Tractor
Tractor Separator Foot
Manual
Unloading Band Level Setting
Hydraulic Piston
Draining Cap
Right-Sided Unloading Hydraulic (Hydraulic)
Tank Body Sheet Thickness
6 mm
Floor Sheet Thickness
12 mm
No. Of Chopping Blades On The Auger
116 Pieces
Fob Usd$24750
Reviews
There are no reviews yet.